Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill

We applied the discrete element method （DEM） of simulation modified by an enlarged particle model to simulate bead motion in a large bead mill. The stainless-steel bead mill has inner diameter of 102 mm and mill length of 198 mm. The bead diameter and filling ratio were fixed respectively at 0.5 mm and 85%. The agitator rotational speed was changed from 1863 to 3261 rpm. The bead motion was monitored experimentally using a high-speed video camera through a transparent mill body. For the simulation, enlarged particle sizes were set as 3-6 mm in diameter. With the DEM modified by the enlarged particle model, the motion of enlarged particles in a mill was simulated.The velocity data of the simulated enlarged particles were compared with those obtained in the experiment. The simulated velocity of the enlarged particles depends on the virtual frictional coefficient in the DEM model. The optimized value of the virtual frictional coefficient can be determined by considering the accumulated mean value. Results show that the velocity of the enlarged particles simulated increases with an increase in the optimum virtual frictional coefficient, but the simulated velocity agrees well with that determined experimentally by optimizing the virtual frictional coefficient in the simulation. The computing time in the simulation decreases with increased particle size.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

A Series of Low-Coordinate Iron Selenido Complexes: Reactivity of a Linear Iron(I) Silylamide towards Selenium

A variety of different low-coordinate iron selenide complexes is reported. These are obtained by reaction of the linear iron(I) silylamide K{18c6}[Fe(N(Dipp)SiMe₃)₂] (Dipp=2,6-diisopropylphenyl) with red selenium. Careful adjustment of the reaction conditions results in the formation of unique low-coordinate selenido iron complexes, namely a monoselenide bridged [2Fe−1Se]²⁺ complex, as well as mononuclear iron per- and triselenides. Further, C−H bond activation of one of the silylamide ligands by a putative terminal iron monoselenide is observed.     

无机固态材料中气体元素分析的现状与进展

本文介绍了气体元素分析样品表面处理的最新研究成果,综述了热导法、红外吸收法、库仑滴定法、飞行时间质谱法和火花源原子发射光谱法等分析方法在无机固态材料气体分析中的应用现状,分析了各自的特点及存在的问题,并展望了气体分析的发展方向(引用文献85篇)。     

元素分析仪测定土壤、沉积物样品碳氮含量的影响因素及数据校正

使用元素分析仪进行土壤、沉积物样品碳、氮含量检测时,样品前处理过程(烘干和酸化)、包样质量以及参考标准品等因素均会对检测结果造成影响.试验结果表明:酸化导致氮百分质量的测定结果降低2.6%~40.0%,碳百分质量的测定受包样质量的影响较大,使用的校正标准与被测样品越相似,校正结果越准确.     

Dependency of dynamic interlaminar shear strength of composites on test technique used

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic ILS strength was determined based on two experimental techniques, namely torsional split Hopkinson bar (TSHB) apparatus using thin walled tubular specimens and compressive split Hopkinson pressure bar (SHPB) apparatus using single lap specimens. The results obtained from these techniques are compared. In general, it is observed that dynamic ILS strength for composites obtained by TSHB testing using thin walled tubular specimens is lower than the dynamic ILS strength obtained using single lap specimens in compressive SHPB. The issues involved in TSHB testing of thin walled tubular specimens made of composites are discussed and the reasons for reduced dynamic ILS strength using thin walled tubular specimens are highlighted. Finite element analysis (FEA) of thin walled tubular specimens made of composite and resin subjected to quasi-static torsional loading is presented. Using FEA results, the reasons for lower ILS strength of composite thin walled tubular specimens are substantiated.     

电感耦合等离子体质谱(ICP-MS)法测定离子吸附型稀土矿中的浸出稀土元素

对浙江某地大量的离子吸附型稀土样品进行了稀土元素(Y,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu)的浸提和测定实验,实验对比了氯化铵和硫酸铵溶液对矿石中稀土元素的浸出性能,选择了杂质浸出较少的硫酸铵溶液作为浸出剂,对不同稀土含量的吸附型稀土矿进行了实验,浸出方法稳定,符合工业开采要求。实验了电感耦合等离子体质谱法测定浸出液中稀土元素分量的方法,浸出液经大比例稀释并酸化后测定,精密度较好,能满足离子吸附型稀土矿评价的质量要求,方法检出限(6σ)0.005~0.26μg/g,单元素测定精密度(n=6,RSD≤6.0%),浸出稀土元素总量测定RSD≤4.0%。实际样品的实验及测定结果满意。     

用平行双样测定结果相对偏差限值评估方法验证实验重复性限合理性的研究

分析方法标准验证实验得到的分析方法基本性能参数重复性限和再现性限是日常检测工作质控规范重要依据。以环境监测领域土壤、沉积物及固废样品中无机元素分析为例,考察了已颁布执行的标准文本和在生态环境部官网公开征求意见的分析方法标准中重复性限。将重复性限转化为相对偏差后,与日常检测工作中质控限值进行了比较。根据目前现行有效的平行双样测定结果相对偏差限值,方法验证数据有多大比例符合质控要求？根据方法验证结果,平行双样测定结果相对偏差限值有无改进可能？从上述两个角度进行了研究。研究结果表明：土壤、沉积物、固体废弃物中无机元素的测定,不同文献来源相同分析方法标准和不同分析方法标准,其重复性限转化得到的平行测定相对偏差合格率存在明显区别;用平行测定相对偏差限值可以快速判断标准文本中的重复性限是否合理,审核方法验证数据质量是否满足要求。基于已有标准文本方法验证数据,探讨了修改平行测定结果相对偏差限值可行性。     

矿物元素指纹图谱的建立及在西洋参产地鉴别中的应用研究

采用电感耦合等离子体质谱法测定了山东、吉林、美国和加拿大4个产地西洋参中50种矿物元素的含量,研究了不同产地西洋参矿物元素的差别和转换系数,构建了西洋参的矿物元素指纹图谱。以各产地矿物元素含量的平均值构建了山东、吉林、美国和加拿大产西洋参的矿物元素标准指纹图谱。采用SPSS 20.0计算了各西洋参矿物元素指纹图谱与其矿物元素标准指纹图谱的相似度,确定了山东、吉林、美国和加拿大产西洋参矿物元素指纹图谱的相似度阈值分别为0.93、0.91、0.98和0.93。通过比较未知产地西洋参矿物元素指纹图谱与矿物元素标准指纹图谱的相似度,进行西洋参的产地判别。采用20批未知产地西洋参样品验证模型的准确性,正确率为85%。此外,研究表明,不同生长年限和不同部位西洋参样品对所建立的西洋参产地鉴别方法无影响。     

合成温度对全梯度正极材料LiNi0.7Co0.15Mn0.15O2的结构和电化学性能影响

通过控制结晶法和浓度梯度进料的方式制备了Ni、Co和Mn三元素组分含量呈全梯度分布的类球形Ni_0.7Co_0.15Mn_0.15（OH）₂前驱体,与LiOH·H₂O均匀混合并焙烧后获得LiNi_0.7Co_0.15Mn_0.15O₂正极材料,系统研究了不同焙烧温度对材料Ni、Co和Mn三元素扩散情况、晶体结构及电化学性能的影响规律。通过能谱仪（EDXS）分析不同焙烧温度下材料颗粒中Ni、Co、Mn三元素的扩散程度。研究结果表明,在800℃下焙烧得到的正极材料梯度分布特征明显且电化学性能最佳,首次放电比容量为186.1 mAh·g^-1（2.8~4.3 V,0.2C）,2C大倍率充放电条件下循环200次后容量保持率为90.1%。这种材料兼具高比容量及良好的循环稳定性,可以用作下一代高能量密度锂离子电池正极材料。